Izvorni znanstveni članak
Temperature dependence of microstructure of (1-x)Al-xZn alloys, x = 0.44, 0.48, 0.54 and 0.62
Željko Skoko
; Physics Department, Faculty of Science, University of Zagreb, Bijenička cesta 32, HR-10002 Zagreb, P.O. Box 331, Croatia
Stanko Popović
; Physics Department, Faculty of Science, University of Zagreb, Bijenička cesta 32, HR-10002 Zagreb, P.O. Box 331, Croatia
Sažetak
The change of microstructure with temperature of the title alloys has been studied in situ by X-ray powder diffraction. It has been found that the temperature dependence of microstructure of the alloys, rapidly quenched from the solid-solution temperature, Tss, to room temperature, RT, is quite different from that of the alloys slowly cooled from Tss to RT. The area between two curves showing that dependence for the given phase during the first heating from RT to Tss and first cooling from Tss to RT is much smaller for the slowly-cooled alloys than for the rapidly quenched alloys. That area slightly increases with the increase of the Zn content in the alloys. The temperature dependence of microstructure of the alloys during the second heating from RT to Tss and second cooling from Tss to RT differs little from that during the first cooling from Tss to RT. The ideal equilibrium state cannot be reached either by slow cooling of the alloys from Tss to RT, or by a prolonged ageing at RT of the rapidly quenched alloys. The observed sequence of phase transitions in alloys during heating from RT to Tss is different from that which could be expected according to the phase diagram of the system Al-Zn accepted in the literature. During cooling from Tss to RT, a temperature hysteresis is observed in reversal phase transitions.
Ključne riječi
Al-Zn alloys; microstructure; phase transition; solid solution; X-ray powder diffraction
Hrčak ID:
302062
URI
Datum izdavanja:
1.3.2006.
Posjeta: 166 *