Skoči na glavni sadržaj

International journal of electrical and computer engineering systems, Vol. 14 No. 5, 2023.

Izvorni znanstveni članak

https://doi.org/10.32985/ijeces.14.5.1

Design and Simulation of Microstrip Antenna Array Operating at S-band for Wireless Communication System

Sattar Othman Hasan orcid id orcid.org/0000-0003-0336-1154 ; Salahaddin University-Erbil, College of Education, Department of Physics Erbil, Iraq
Saman Khabbat Ezzulddin ; Salahaddin University-Erbil, College of Science, Department of Physics Erbil, Iraq
Rashad Hassan Mahmud ; Salahaddin University-Erbil, College of Education, Department of Physics Erbil, Iraq
Mowfaq Jalil Ahmed ; Salahaddin University-Erbil, College of Education, Department of Physics Erbil, Iraq

Puni tekst: engleski pdf 3.372 Kb

str. 497-506

preuzimanja: 399

citiraj

Sažetak

In this article, different design configurations of rectangular microstrip patch antenna (RMSA) array operating at S-band frequency are presented. The substrate material utilized in the designs is Rogers-RT-5800 with dielectric permittivity (Ԑr= 2.2), thickness of (h=1.6 mm), and loss tangent of (δ = 0.009). The performances of a single element, (1×2), (2×2) and (1×4) array elements operating at (3.6 GHz) are investigated using the CST and HFSS numerical techniques. The simulation results indicates that the antenna gain of (8.68, 10.35, 10.43 and 10.52) dB, VSWR (1.045, 1.325, 1.095 and 1.945), return loss (-34.91, -17.15, -27.42 and -12.26) dB, and bandwidth (85.00, 200.00, 215 and 106.4) MHz are achieved with the implementation of HFSS for advanced single element, (1×2), (2×2) and (1×4) array elements, respectively. Besides, the corresponding antenna parameter values provided by CST are, gain (7.36, 9.8, 9.87 and 10.30) dB, VSWR (1.011, 1.304, 1.305 and 1.579), return loss (-44.97, -17.58, -17.55 and -14.01) dB, and bandwidth (92.28, 204, 229.49 and 129.12) MHz, respectively. The results also reveals that the higher gain and wider bandwidth are, respectively, achieved with (1×4) and (2×2) array configuration arrangement and with both simulation techniques. Additionally, a good agreement and an advancement between the obtained results with the ones previously studied for the same array types operating at S-band frequencies are also observed.

Ključne riječi

Patch Antenna; Microstrip antenna; antenna array; wireless communication; s-band;

Hrčak ID:

303566

URI

https://hrcak.srce.hr/303566

Datum izdavanja:

5.6.2023.

Posjeta: 902 *