Prethodno priopćenje

https://doi.org/10.17559/TV-20221113072207

Influence of Core Density and Thickness on the Behavior of Sandwich Beams under Three-Point Bending: Analytical and Experimental

Mahdi Kazemi ; Malayer University, 65719-95863 *
Alireza Mirzabigi ; Malayer University, 65719-95863

* Dopisni autor.

Sažetak

The sandwich beams with a foam core and metal face sheets fail in mechanisms such as face sheet yield, core yield, local indentation, and face sheet folding. They can be used as impact energy absorbers in the aerospace, shipbuilding, automotive, rail industries, and elevators. This paper investigated the effect of changes in foam core density and thickness of sandwich beams using analytical methods and experimental tests through the three-point bending process. A total of 21 samples with a foam core made of polyurethane foams of different densities and thicknesses were subjected to a quasi-static three-point bending load. The load-displacement diagrams were obtained at the center of the beam using the Santam testing machine. Afterwards, the impact parameters including specific energy absorption (SEA), maximum and average forces, and efficiency coefficient were examined as the objectives of the test. The analytical and experimental bending results showed that the analytical results have good agreement with the experimental results. Also, it was found that increasing foam core thickness and density can increase the energy absorption capacity. Moreover, the results of experimental tests showed that the energy absorption capacity increased by 93.12% in the samples with the same thickness when increasing the density. Likewise, examining the samples with the same density and different thicknesses revealed that the energy absorption capacity increased by 33.37%.

Ključne riječi

foam core; polyurethane foam; sandwich beam; specific energy absorption; three-point bending

Hrčak ID:

309250

URI

https://hrcak.srce.hr/309250

Datum izdavanja:

25.10.2023.

Posjeta: 762 *