Izvorni znanstveni članak

https://doi.org/10.21278/TOF.482056023

Numerical Investigation Into Convective Heat Transfer Coefficient of the Grinding Fluid Used in a Deep Grinding Process

Puneet Kumar Gupta ; Department of Mechanical Engineering, BIET, Jhansi, India *
N.P. Yadav ; Department of Mechanical Engineering, BIET, Jhansi, India

* Dopisni autor.

Sažetak

This paper presents a mathematical modelling approach to an investigation into the grinding temperature and the convective heat transfer coefficient of the grinding fluid using the computational fluid dynamics approach. The maximum grinding temperature varies from 325 K to 370 K as the grinding depth increases from 0.50 mm to 1.10 mm at 60 m/s wheel velocity for water as a grinding fluid and 419 K to 619 K for kerosene oil as a grinding fluid. The convective heat transfer coefficient depends on the density, specific heat, conductivity, and viscosity of the grinding fluid. It is observed that the value of the convective heat transfer coefficient increases with an increase in density, specific heat, and conductivity of the grinding fluid and decreases with an increase in viscosity of the grinding fluid. The convective heat transfer coefficient for water and kerosene oil is 137,730 W/m2-K and 23,512 W/m2-K, respectively, at a 76 m/s wheel velocity and 0.50 mm depth of cut.

Ključne riječi

computational fluid dynamics (CFD); grinding temperature; convective heat transfer coefficient; grinding fluid properties

Hrčak ID:

316422

URI

https://hrcak.srce.hr/316422

Datum izdavanja:

25.2.2024.

Posjeta: 699 *