Preliminary communication

https://doi.org/10.31803/tg-20240422144655

Analysis of the Impact of Geometry Modifications on the Fit of Splined Shaft Connections Manufactured Using Selected AM Methods

Grzegorz Budzik orcid.org/0000-0003-3598-2860 ; Rzeszów University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland
Tomasz Dziubek orcid.org/0000-0002-3259-446X ; Rzeszów University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland *
Małgorzata Gontarz ; Rzeszów University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland
Bartłomiej Sobolewski orcid.org/0000-0003-3824-6228 ; Rzeszów University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland
Małgorzata Zaborniak orcid.org/0000-0002-3219-3092 ; Rzeszów University of Technology, Al. Powstańców Warszawy 12, 35-959 Rzeszów, Poland

* Corresponding author.

Abstract

Broadly, understood additive manufacturing techniques expand the spectrum of production of machine parts that are used in various types of devices. However, the requirements to ensure dimensional and shape accuracy require the determination of appropriate material allowances or clearances to enable correct assembly. For the above reasons, the study presents an analysis of the impact of the assumed geometry modifications on the possibility of assembling a splined connection manufactured using selected AM techniques. The work focused on the analysis of changes in geometry resulting from the technology used. Using the Atos II Triple Scan optical measurement system and Gom Inspect software, the possibility of installation was determined for four variants of the splined shaft connection geometry, resulting from the technologies used.

Keywords

3D Printing; CAx systems; coordinate measurements method; coordinate optical measurements; quality control

Hrčak ID:

316916

URI

https://hrcak.srce.hr/316916

Publication date:

31.5.2024.

Visits: 389 *