Drvna industrija, Vol. 75 No. 2, 2024.
Izvorni znanstveni članak
https://doi.org/10.5552/drvind.2024.0141
Acoustic Properties of Wood-Based and Non-Wood-Based Materials for Piano-Case Making
Petr Zatloukal
orcid.org/0000-0001-5898-5496
; Mendel University, Brno, Czech Republic
Jan Tippner
; Mendel University, Brno, Czech Republic
Tadeáš Doskočil
; Mendel University, Brno, Czech Republic
Sažetak
This article presents the possibilities of substituting expensive and scarce wood materials in the construction of piano cases, especially the front panels of upright pianos. Three-layer blockboard, multi-layer plywood, medium-density fibreboard (MDF), and Purenit were selected for the study. These materials were long-time climatised at 20 °C and 50 % relative air humidity. Their frequencies, damping coefficient and relative amplitude were measured. The density r, sound velocity v, dynamic modulus of elasticity E´, sound impedance Zn, and Acoustic Conversion Efficiency (ACE) were calculated. With the materials used to make the front panels of an upright piano, a subjective assessment of the instrument’s acoustic response was made. The presence of front panels of any type was found to have a negative effect on the sound except at low frequencies. With panels fitted, the best acoustic properties were achieved by blockboard, followed by plywood, MDF and Purenit panels in that order; this was affirmed by the subjective assessment. The best acoustic performance was achieved by blockboard and plywood. Taking both price and performance into consideration, MDF presented the best compromise. Purenit was ruled out due to its high damping properties.
Ključne riječi
composites; acoustic; non-destructive-test; piano case
Hrčak ID:
317888
URI
Datum izdavanja:
15.6.2024.
Posjeta: 512 *