Prethodno priopćenje

Simulation analysis of wheel bearing forging process based on DEFORM

H. C. Ji ; Zhejiang Zhaofeng Mechanical and Electronic Co, Ltd, Hangzhou, China; College of Mechanical Engineering, North China University of Science and Technology, Hebei, Tangshan, China *
R. Zhang ; College of Mechanical Engineering, North China University of Science and Technology, Hebei, Tangshan, China
N. Z. Kang ; Zhejiang Zhaofeng Mechanical and Electronic Co, Ltd, Hangzhou, China
J. H. Huang ; Zhejiang Zhaofeng Mechanical and Electronic Co, Ltd, Hangzhou, China

* Dopisni autor.

Sažetak

Aiming at the complex structure of wheel hub bearing parts, which is difficult to form, an upsetting-pre-forgingfinal forging forming process is adopted after process analysis. A three-dimensional finite element model is established by Deform software to study the process of wheel hub bearing forging, and the distribution law of temperature field, equivalent stress field and other important fields in the forging process are systematically analyzed. The influence of forging process parameters on the forming quality of wheel hub bearings is studied. Based on the results of Deform simulation, the optimal forging process parameters are used in the actual forging production, and the forging parts obtained have clear hierarchical levels in each region and good forming quality. The experiment verifies that the forging is complete and meets the product requirements under the optimized process parameters, which provides theoretical and technological guidance for the hot die forging of wheel hub bearing parts.

Ključne riječi

55 steel; wheel bearing; forging and forming; modeling; numerical analysis

Hrčak ID:

319869

URI

https://hrcak.srce.hr/319869

Datum izdavanja:

1.1.2025.

Posjeta: 326 *