Skoči na glavni sadržaj

Tehnički glasnik, Vol. 19 No. si1, 2025.

Izvorni znanstveni članak

https://doi.org/10.31803/tg-20250324183037

Reproducibility of Areal Topography Parameters Obtained by Atomic Force Microscope

Andrej Razumić orcid id orcid.org/0000-0002-1257-0233 ; Department of Polytechnics, Dr. Franjo Tuđman Defense and Security University, Ilica 256b, 10000 Zagreb, Croatia *
Biserka Runje orcid id orcid.org/0000-0002-7786-0864 ; Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lučića 5, 10000 Zagreb, Croatia
Zdenka Keran orcid id orcid.org/0000-0001-7894-6590 ; Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Ivana Lučića 5, 10000 Zagreb, Croatia
Zvonko Trzun orcid id orcid.org/0000-0003-3570-9063 ; Department of Polytechnics, Dr. Franjo Tuđman Defense and Security University, Ilica 256b, 10000 Zagreb, Croatia
Daniel Pugar orcid id orcid.org/0000-0002-0449-9692 ; Department of Polytechnics, Dr. Franjo Tuđman Defense and Security University, Ilica 256b, 10000 Zagreb, Croatia

* Dopisni autor.

Puni tekst: engleski pdf 1.002 Kb

str. 1-6

preuzimanja: 192

citiraj

Sažetak

In the context of quality management and Industry 5.0, reproducibility is a critical indicator of the ability to achieve consistent and predictable results in laboratories, research, as well as in systems and processes. Reproducibility is also an indispensable component of measurement uncertainty, which quantifies the precision of measurement results. To standardize the measurement procedure for surface topography parameters obtained using atomic force microscope (AFM) and to establish the accuracy and precision of measurement results, an analysis of repeatability and reproducibility was conducted in accordance with the ISO 5725-2:2019 standard, Accuracy (trueness and precision) of measurement methods and results – Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method. Measurements were performed on two AFM standards and a steel sample. The research was conducted over the course of one year and repeated after four years using the same samples.

Ključne riječi

areal topography parameters; atomic force microscope; Industry 5.0; quality management; reproducibility

Hrčak ID:

330630

URI

https://hrcak.srce.hr/330630

Datum izdavanja:

1.6.2025.

Posjeta: 453 *