Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.31803/tg-20230928070645

Thermo-Hydraulic Performance of Tubular Heat Exchanger with Opposite-Oriented Trapezoidal Wing Perforated Baffle Plate

Md. Atiqur Rahman ; Department of Mechanical Engineering, Vignan's Foundation for Science, Technology & Research (Deemed to be University), Vadlamudi, Guntur-522213, Andhra Pradesh, India / Department of Mechanical Engineering, Birla Institute of Technology, Mesra, Ranchi-835215, India *
S. M. Mozammil Hasnain ; Marwadi University Research Centre, Department of Mechanical Engineering, Faculty of Engineering & Technology, Marwadi University, Rajkot, Gujrat-360003, India
Rustem Zairov ; Aleksander Butlerov Institute of Chemistry, Kazan Federal University, 1/29 Lobachevskogo Str., Kazan 420008, Russian Federation

* Dopisni autor.


Puni tekst: engleski pdf 1.123 Kb

str. 350-358

preuzimanja: 124

citiraj


Sažetak

A detailed experimental study explored a new axial heat exchanger with swirling air over heated tubes. This heat exchanger features circular baffle plates with perforations and trapezoidal air deflectors at different angles. The tubes are aligned parallel to the airflow, and the deflectors create intense air turbulence, which improves heat transfer. The heat flux on the tubes is kept constant, and each baffle plate has eight deflectors positioned in reverse to induce swirling air within a circular duct that contains the hot water tubes. The baffle plates are spaced with varying pitch ratios, and the Reynolds number ranges from 16,000 to 30,000. The study found that the heat exchanger's performance highly depends on the pitch ratio and deflector angle, with the highest thermal enhancement factor (TEF) of 2.48 achieved at a 30° deflector angle and a pitch ratio of 1.2. These findings highlight the importance of optimizing design parameters to improve heat exchanger performance, offering valuable insights for better thermal management in industrial and environmental applications.

Ključne riječi

deflector inclination angle; discontinuous swirl flow; flow recirculation; relative flow resistance; trapezoidal deflector; thermo-fluid performance

Hrčak ID:

332160

URI

https://hrcak.srce.hr/332160

Datum izdavanja:

15.9.2025.

Posjeta: 220 *