Sažetak sa skupa
Estimation of Standards for Gold and Silver Sampling
Jasenka Živko-Babić
I. Jasprica
M. Škarić-Medić
Marko Jakovac
Sažetak
Different precious dental alloys are used in prosthodontic therapy. Precious metals are the synonym for biocompatibility. Gold is one of the most inert and silver the most active presious metals.
The purpose of this study was to develop an analyze the chromatographic spots of pure gold and silver (Aurodent, Celje, Slovenia).
The sampling was performed in a water-HCl(conc.) solution in a 10 : 1 volume ratio at room temperature using a 4,5 V battery. Dissoluted cations and solutions of standard elements (salts of gold and silver) were applied to HPTLC plates (Mareck, Darmstadt, Germany) 10 x 10 cm precoated with cellulose. Plates were developed in a vertical
separating chamber to a height of approximately 8 cm saturated with iso-amyl (3.methyl-1-butanol) - HCl (36,5%) - acetonitrile in a volume ratio 5,4 : 4,3 : 0,3. After development, plates were dried in (a steam of) hot air and the cations were visualized by spraying with the saturated ethanolic solutions of alizarin, diphenylcarbazide,
quercetin and 0,1% chlorophorm solution of dithizone. After drying, plates were exposed to NH3 vapor.
According to the Rf value and the color of the spots, the difference between gold and silver were obtained.
Anodic sampling with thin-layer chromatography is a suitable, nondestructive method for identification of cations presents in different dental alloys. It is possible to identify the cations with their mass ratio W > 1%. The results have shown that the described method is suitable for analysis of gold and silver and it can be used in future work to identify those cations in dental alloys of unknown
composition.
Ključne riječi
Hrčak ID:
3581
URI
Datum izdavanja:
15.9.2003.
Posjeta: 2.096 *