Stručni rad

Adhesive bonding of polymeric composites

Ana Pilipović orcid.org/0000-0003-1330-6458 ; Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, Katedra za preradbu polimera, Ivana Lučića 5, HR-10000 Zagreb, Croatia
Zoran Domitran orcid.org/0000-0003-0626-1685 ; Sveučilište u Zagrebu, Fakultet strojarstva i brodogradnje, Katedra za preradbu polimera, Ivana Lučića 5, HR-10000 Zagreb, Croatia
Josip Stojšić ; Sveu ilište J. J. Strossmayera u Osijeku, Strojarski fakultet u Slavonskom Brodu, Katedra za obradu odvajanjem čestica i preradu polimera, Trg Ivane Brlić-Mažuranić 2, HR-35000 Slavonski Brod, Croatia

Sažetak

Adhesive bonding is a modern method for joining parts and is applied for connecting different types of materials. Adhesive bonding has many advantages over mechanical joining, because in adhesive bonding load is carried over entire surface of joint thus providing better resistance to flexural stress and vibrations. Adhesives are substances that, based on chemical configuration and physical state, at the moment of coating the surfaces allow their joining. For joining parts of metal, glass, ceramics, polymers and composites adhesives are used, which may be epoxide, polyurethane, acrylate etc. The paper presents shear strength testing of the composite assemblies' joints bonded by filament winding and direct pressing by using two polymer adhesives.

Ključne riječi

adhesive bonding of composite; filament winding; direct pressing; shear strength

Hrčak ID:

38680

URI

https://hrcak.srce.hr/38680

Datum izdavanja:

30.6.2009.

Podaci na drugim jezicima: hrvatski

Posjeta: 4.219 *