Prethodno priopćenje

The efect of cooling rate on the properties of alloyed cast-iron sizing roll

P. Jelić ; Faculty of Metallurgy, University of Zagreb, Sisak, Croatia
L. Lazić ; Faculty of Metallurgy, University of Zagreb, Sisak, Croatia
J. Črnko ; Faculty of Metallurgy, University of Zagreb, Sisak, Croatia

Sažetak

Directional heat transfer was investigated by temperature measurements in the casting and in the mould using thermocouples. Measurements were performed in operating conditions during pouring, solidification, and cooling of the casting. Total measurement time was 35,5 hours. After cutting, specimens were extracted for metallographic and hardness testing. Test results provided confirmation of directional heat transfer (directional cooling) that would ensure acquirement of a desired casting structure and mechanical properties.

Ključne riječi

alloyed grey cast iron; sizing roll; indefinite chill; moulding technology; thermocouple temperature measurement

Hrčak ID:

40250

URI

https://hrcak.srce.hr/40250

Datum izdavanja:

1.1.2010.

Podaci na drugim jezicima: hrvatski

Posjeta: 2.863 *