Metallurgy, Vol. 54 No. 1, 2015.
Original scientific paper
A Flow rate of gas versus the level of gas dispersion in physical model of continuous refining reactor
M. Saternus
; Silesian University of Technology, Institute of Metals Technology, Katowice, Poland
T. Merder
; Silesian University of Technology, Institute of Metals Technology, Katowice, Poland
Abstract
Today there are many reactors used in refining of primary and secondary aluminium. Continuous reactor URC-7000 is one of them. The model of such reactor was built at 1:3 scale. The physical modelling research was conducted taking into account the flow rate of refining gas and its influence of the dispersion level. There are two nozzles introducing a gas. The carried out tests included the different flow rate of a gas through the nozzles (from 5 to 15 dm3/min). Additionally, the mixing characteristics were measured and discussed for different flow rate of an inert gas.
Keywords
aluminium; refining; argon; hydrogen; physical modelling
Hrčak ID:
126666
URI
Publication date:
1.1.2015.
Visits: 1.391 *