Preliminary communication

Determination of the EOS maragingsteel MS1 material resistance at low temperatures

J. Dobránsky ; Faculty of Manufacturing Technologies with a seat in Prešov, Technical University of Košice, Slovak Republic
L. Běhálek ; Technical University of Liberec, Faculty of Mechanical Engineering, Liberec, Czech Republic
P. Baron ; Faculty of Manufacturing Technologies with a seat in Prešov, Technical University of Košice, Slovak Republic
M. Kočiško ; Faculty of Manufacturing Technologies with a seat in Prešov, Technical University of Košice, Slovak Republic
V. Simkulet ; Faculty of Manufacturing Technologies with a seat in Prešov, Technical University of Košice, Slovak Republic
E. Vojnová ; 1.PN Moulds and Tools, Prešov, Slovak Republic
J. Briančin ; Institute of Geotechnics, Slovak Academy of Sciences, Košice, Slovak Republic

Abstract

This article deals with determination of the EOS MaragingSteel MS1 material resistance at different low temperatures. Material resistance was evaluated in two types of standardized specimens. The impact energy at the specimens tested at 10 °C, values for the specimens with no notch were compared to the V - notch specimens, higher by approximately one - third. When the temperature dropped to 0 °C, the values of the impact energy slightly decreased as well. It therefore follows that lower temperatures result in decrease in the values of the impact strength. This experiment provided us with the opportunity to find out whether the decrease in temperature impacts the resistance of the tested material.

Keywords

alloy steel; mechanical properties; impact energy; fracture; surface

Hrčak ID:

153644

URI

https://hrcak.srce.hr/153644

Publication date:

1.7.2016.

Visits: 1.956 *