Original scientific paper

https://doi.org/10.5552/drind.2016.1503

Simulating Strength Behaviors of Corner Joints of Wood Constructions by Using Finite Element Method

Bulent Kaygin ; Bartin University, Forestry Faculty, Department of Forest Industry Engineering, Bartin, Turkey
Huseyin Yorur ; Bartin University, Forestry Faculty, Department of Forest Industry Engineering, Bartin, Turkey
Burhanettin Uysal ; Bartin University, Forestry Faculty, Department of Forest Industry Engineering, Bartin, Turkey

Abstract

Using finite element method (FEM) has become wide spread in the field of wood mechanics for analyzing difficult problems instead of conventional methods. The objective of this study is to determine the strength properties of wood corner joints using FEM. For this purpose, diagonal compression and diagonal tension experiments were carried out using dowel, mortise and tenon elements. Corner joints (L-type) were prepared with Scotch pine (Pinus sylvestris L.) and Beech (Fagus orientalis Lipsky) woods. Data obtained experimentally were used in FEM computer modeling to determine structural specifi cations of wood materials. The amount of deformation as a result of compression-tension in the corner joints was determined and then simulated with a computer program using FEM (ANSYS Multiphysics/LS-DYNA). As a result, the amount of deformation obtained from experiments was consistent with the FEM computer modeling with 90 to 97 %. It is suggested that strength properties of joints can be forecast by using FEM computer modeling instead of physical experiments that may cause loss of time, increase of cost and destruction of materials.

Keywords

Finite Element Method (FEM); ANSYS/LS-DYNA; wood, strain gauge; wooden corner joints; dowel; mortise; tenon

Hrčak ID:

160170

URI

https://hrcak.srce.hr/160170

Publication date:

29.6.2016.

Article data in other languages: croatian

Visits: 2.693 *