Drvna industrija, Vol. 58 No. 3, 2007.
Original scientific paper
Differences in round wood measurements using electronic 2D and 3D systems and standard manual method
Karel Janák
Abstract
This paper describes the use of electronic scanning systems for round wood in the Czech Republic. It analyses the two most widespread systems (2D and 3D), compares the values of diameters and volumes measured by these systems with the results of measurements using the Huber method and evaluates differences. The volume of the logs determined by the 2D system was 0.4 – 0.5% higher than the volume determined by manual comparative
measurement. The deviation is in the range of possible measuring accuracy. The log volume determined by the 3D system was 2.5 – 5.5% lower than by careful manual measurement. The log volumes stated in the delivery bills are very rough and they cannot be used to assess the accuracy of electronic measurement systems. The study briefly outlines the present state and trends of the electronic reception of logs in the Czech Republic.
Keywords
log yards; round wood; electronic measurement systems; reception; volume calculation
Hrčak ID:
17494
URI
Publication date:
5.11.2007.
Visits: 2.916 *