Original scientific paper

Mechanical clinching process stress and strain in the clinching of EN-AW5754 (AlMg3), and EN AW-5019 (AlMg5) metal plates

J. Cumin ; Mechanical Engineering Faculty, Slavonski Brod, University of Osijek, Croatia
I. Samardžić ; Mechanical Engineering Faculty, Slavonski Brod, University of Osijek, Croatia
M. Dunđer ; Department for Polytechnics, University of Rijeka, Croatia

Abstract

This paper presents the results of Finite Element Method numerical simulation performed onEN-AW5754(AlMg3), EN AW-5019 (AlMg5) plates subjected to mechanical clinching. The goal was to observe differences between aluminum plates in the same tool; and to determine the possibility of using the constructed tool for the clinching of Al-Al material combinations. This tool construction is to be produced and tested in laboratory conditions, to elaborate prospective results, and reach additional conclusions.

Keywords

AlMg alloy; mechanical clinching; mathematical model; plates

Hrčak ID:

189376

URI

https://hrcak.srce.hr/189376

Publication date:

1.1.2018.

Visits: 2.017 *