Preliminary communication

https://doi.org/10.5552/drind.2018.1705

Physical and Mechanical Properties of Hornbeam Wood from Dominant and Suppressed Trees

Majid Kiaei orcid.org/0000-0001-9222-8069 ; Department of Wood and Paper Science and Technology, Chalous Branch, Islamic Azad University, Chalous, Iran
Zatollah Abadian ; Department of Wood and Paper Science and Technology, Chalous Branch, Islamic Azad University, Chalous, Iran

Abstract

Physical and mechanical properties are important factors in determining the suitability and application of wood material. This study aimed to investigate physical and mechanical properties of hornbeam wood (Carpinus betulus L.) in dominant and suppressed trees. Disks and logs of wood were cut at breast height to examine physical properties (oven- dried density, basic density, longitudinal shrinkage, tangential shrinkage, radial shrinkage, and volumetric shrinkage) and mechanical properties (static bending, compression strength parallel to the grain, compression perpendicular to the grain and hardness). T-test analysis indicated that forest mass (dominant-suppressed trees) affected the mechanical properties significantly (except modulus of elasticity). No significant difference was found between dominant and suppressed trees in terms of physical properties. MOE and MOR are higher in suppressed trees than in dominant trees. The average values of compression strength parallel to the grain, compression strength perpendicular to the grain and hardness of hornbeam wood were higher in the dominant trees than in the suppressed stands. In terms of mechanical properties of hornbeam wood in suppressed and dominant trees, the quality of wood is fair.

Keywords

suppressed trees; dominant trees; hornbeam; physical properties; mechanical properties

Hrčak ID:

196969

URI

https://hrcak.srce.hr/196969

Publication date:

31.3.2018.

Article data in other languages: croatian

Visits: 2.749 *