Review article
https://doi.org/10.17794/rgn.2018.4.9
CONTRIBUTION TO THE METHODOLOGY OF DETERMINING THE OPTIMUM MUD DENSITY - A CASE STUDY FROM THE OFFSHORE GAS CONDENSATE FIELD D IN THE PERSIAN GULF
Damir Zadravec
; Qatar Petroleum, Al Corniche St, P.O. BOX 3212, Doha Qatar
Zdenko Krištafor
; University of Zagreb, RGN faculty, Pierottijeva 6, Zagreb, Croatia
Abstract
Drilling the wells using water based mud through shale formations, causes their exposure to serious time-dependent wellbore instability due to shale swelling. Operating companies, before drilling operations through demanding shale formations, usually conduct drilling fluid optimization studies in order to define the proper mud type, mud density, salt type and concentration for inhibition. Through the analysis of offset wells, they are interpreting data about mud filtrate breakouts into the rock formations and chemical potential mechanisms to understand their influence on the time-de-pendent wellbore instability. The main objective of this paper is to give an insight in time-dependent and mechanical wellbore instability problems faced while drilling the wells through different shale formations in the gas condensate field D in the Persian Gulf. The importance of drilling fluid design optimization and solutions applied to overcome hole instability problems were analysed and highlighted. Besides the development of a model for mud density calculations, a concept of effective hoop stress and its influence on time dependent failure mechanisms is discussed. As a contribution to the method improvement, mud density calculation is verified by taking into the consideration the relationship between pore pressure and effective hoop stress and it is based on measured data from Well A in gas condensate field D from the Persian Gulf.
Keywords
time-dependent well bore instability; shale formations; effective hoop stress; mud density
Hrčak ID:
205593
URI
Publication date:
7.9.2018.
Visits: 2.054 *