Technical gazette, Vol. 25 No. 6, 2018.
Original scientific paper
https://doi.org/10.17559/TV-20161128094553
Experimental Investigation into Wear and Tool Life of Milling Cutter PVD Coated Carbide Inserts While Armox 500 Steel Hard Milling
Jozef Majerík
orcid.org/0000-0002-6577-1987
; Alexander Dubcek University of Trencin, Faculty of Special Technology, Department of Engineering, Pri Parku 19, 911 05, Trenčín, Slovak Republic
Rozmarína Dubovská
; UHK-University of Hradec Kralove, Faculty of Education, Department of technical subjects, Rokitanskeho 62, 500 03, Hradec Kralove, Czech Republic
Jaroslav Jambor
; Alexander Dubcek University of Trencin, Studentska 1, 911 50, Trenčín, Slovak Republic
Robert Čep
orcid.org/0000-0001-9610-4215
; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining, Assembly and Engineering Metrology, 17. listopadu 15, 708 33, Ostrava, Czech Republic
Jiří Kratochvíl
; VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machining, Assembly and Engineering Metrology, 17. listopadu 15, 708 33, Ostrava, Czech Republic
Karel Kouřil
; Brno University of Technology, Faculty of Mechanical Engineering, Institute of Manufacturing Technology, Technická 2896/2, 616 69 Brno, Czech Republic
Abstract
The goal of the submitted paper is to evaluate the dependence of tool life T = f(vc) in hard rough face milling process of the Armox 500 steel through the PVD coated cemented carbide cutting material with SNHF 1204EN-SR-M1 tool insert geometry. Practical tests of choice material were performed in the milling machine tool with vertical axis. The effect of applied cutting conditions on the surface finish, tool life, wear of cutting tool, such as flank wear and surface structure of applied cutting inserts, was investigated during the performed experiments. The goal of this article is to research the impact of various cutting speeds values during the process of hard face rough milling. Experiments are carried out with an aim to study tool life, surface finish and flank wear prediction on the PVD coated cemented carbide cutting material in hard milling processes. This has been observed through the REM and mathematical method of least squares for this characterization. The presented approach and acquired results will prove themselves helpful in understanding the machinability of Armox 500 steel during the hard milling process.
Keywords
carbide inserts; flank wear; hard milling; milling cutter; tool life; tool wear
Hrčak ID:
212811
URI
Publication date:
16.12.2018.
Visits: 2.062 *