Original scientific paper

https://doi.org/10.5552/drind.2018.1768

Investigation of the Effects of Heat Treatment Applied to Beech Plywood

Aurel Lunguleasa ; Faculty of Wood Engineering, Transylvania University of Brasov, Brasov, Romania
Nadir Ayrilmis ; Faculty of Forestry, Istanbul University-Cerrahpasa, Istanbul, Turkey
Cosmin Spirchez ; Faculty of Wood Engineering, Transylvania University of Brasov, Brasov, Romania
Ferhat Özdemir ; Faculty of Forestry, Kahramanmaras Sutcu Imam University, Kahramanmaras, Turkey

Abstract

The aim of this study is to determine the effects of heat treatment on some physical and mechanical properties of beech plywood boards. The 3-layered beech plywood boards with a thickness of 3.9 mm were subjected to heat treatment for 1, 2 and 3 hours at temperatures of 160, 180 and 200 °C. These beech plywood boards were tested for physical properties such as density, water absorption and thickness swelling, mechanical property tests such as modulus of rupture (MOR) and Brinell hardness, and mass loss rates according to the relevant standards. The results obtained show that the hydrophobicity of beech plywood boards is improved but the strength and weight loss are adversely affected, depending on the temperature and duration of heat treatment. It has been found that beech plywood boards heat-treated at 200 °C for 3 hours can be used in very humid environments for average mechanical stresses of wood parts with a reduced thickness swell of 4 % and a reduced water absorption rate of more than 12 %.

Keywords

plywood; heat treatment; mass loss; swelling; Brinell hardness; water absorption

Hrčak ID:

214045

URI

https://hrcak.srce.hr/214045

Publication date:

28.12.2018.

Article data in other languages: croatian

Visits: 1.615 *