Skip to the main content

Original scientific paper

Innovation in Power Maneuvering Mode for NPP Hanhikivi with WWER- 1200 reactor

Grigory Ponomarenko ; “Fennovoima Oy”Company Salmisaarenaukio 1, 00180 Helsinki, Finland


Full text: english pdf 1.756 Kb

downloads: 296

cite


Abstract

The possible innovative methods of maneuvering are investigated on the example of NPP
Hanhikivi with WWER-1200 reactor in a frame of AES-2006 project. Stationary fuel loading
analysis was performed for the for the most significant graph of daily manoeuvring (100-50-100)%
Nnom with the rate of power change 1-5 % Nnom per minute, that are the European Utility
Requirements. The improvement is ensured by maintaining a constant average coolant temperature
in the core "Tav = const" (by changing the pressure in SGs) and a constant boron content in the
primary coolant "CB = const". The change of power and Xenon concentration during power
manoeuvring is compensated by special movement of the special chosen grey CRs in the core
instead of CB change. CB is changed in usual way only for fuel burnup compensation during
reactor campaign. The mode "Tav = const" is normally used for the control of power of PWRs in
wide diapason and it reduces the amount of radioactive primary water discharges and the
mechanical fatigue of the RCS components. Implementation of both – main mode "Tav = const"
and auxiliary mode "CB = const" leads to positive effect of synergy. The mode "Tav = const"
facilitates the implementation of the mode "CB = const" very much, and they together allow to
completely eliminate the production of liquid waste during maneuvering and ensure load following
practically for the full length of reactor campaign. Presence of large CRs quantity (121 pieces) in
the WWER-1200 allows using part of them as grey CRs without safety violation due to small
decrease of EP efficiency. The efficiency of grey CRs is 2-3 times less than of usual black CRs that
allows more softly maintain criticality, AO and power peaking factors in their acceptable diapasons
at CB = const. Analysis is performed with Russian 3D code BIPR-7 only for neutronics aspects
without considering strength cyclic characteristics of the equipment and nuclear fuel.

Keywords

Maneuvering modes, Boron-free control, grey absorbing rods, advantages of WWER-1200.

Hrčak ID:

247092

URI

https://hrcak.srce.hr/247092

Publication date:

28.10.2019.

Visits: 723 *