Skip to the main content

Technical gazette, Vol. 28 No. 2, 2021.

Original scientific paper

https://doi.org/10.17559/TV-20191114164921

Influence of the Compressible Flexographic Sleeve Exploitation on Print Quality

Saša Petrović* orcid id orcid.org/0000-0003-3415-4641 ; Faculty of Technical Sciences, University of Novi Sad, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
Nemanja Kašiković orcid id orcid.org/0000-0002-4416-8070 ; Faculty of Technical Sciences, University of Novi Sad, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
Dragoljub Novaković orcid id orcid.org/0000-0002-6455-7233 ; Faculty of Technical Sciences, University of Novi Sad, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
Gordana Bošnjaković ; Faculty of Technical Sciences, University of Novi Sad, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
Emine Arman Kandirmaz ; School of Applied Sciences, Marmara University, Goztepe, 34722 Istanbul, Turkey
Arif Ozcan orcid id orcid.org/0000-0002-0305-9169 ; School of Applied Sciences, Marmara University, Goztepe, 34722 Istanbul, Turkey

Full text: english pdf 1.763 Kb

page 391-400

downloads: 673

cite

Abstract

Due to the nature of the used materials, the quality of the flexographic print depends on a large number of process parameters and the materials parameters in all the phases of the production. During the pre-press, sleeves and stickyback tapes are needed for the mounting of the printing forms. These two components in the process of the flexographic printing are the least researched ones, even though they have a potentially significant impact on the stability and the quality of the printing process, as well as the print quality itself. Therefore, this research is oriented towards the investigation of the influence of the compressible sleeve exploitation on the process and print quality parameters through the measurement of optical density, tone value increase and trapping. The aim of the research is the improvement of stability and predictability of the printing process and print quality through the defining of the intensity and the trends of changes in densitometric parameters of quality.

Keywords

densitometry; exploitation; flexographic sleeve; print quality; printing process stability

Hrčak ID:

255804

URI

https://hrcak.srce.hr/255804

Publication date:

17.4.2021.

Visits: 1.562 *