Original scientific paper
https://doi.org/10.13167/2023.27.5
INFLUENCE OF BINDERS, MIX PROPORTIONS, AND FABRICATION METHOD ON THE CHARACTERISTICS OF FLY ASH AGGREGATE
Subhakanta Dash
; Department of Chemistry, Synergy Institute of Engineering and Technology, Dhenkanal-759001, Odisha, India
*
Piyush Gupta
; Department of Chemistry, Faculty of Engineering and Technology, SRM Institute of Science and Technology, NCR Campus, Delhi-NCR Campus, Delhi-Meerut Road, Modinagar-201204, Ghaziabad, Uttar Pradesh, India
Syed Mohammed Mustakim
; Department of Environment and Sustainability, CSIR-IMMT, Bhubaneswar-751013, Odisha, India
Itishree Mohanty
; Department of Chemistry, Synergy Institute of Engineering and Technology, Dhenkanal-759001, Odisha, India
* Corresponding author.
Abstract
In this paper, two types of lightweight fly ash (FA) aggregates: cold bonded fly ash (CFA) and sintered fly ash (SFA) aggregates were prepared through the cold bonding and sintering method. During the pelletization process, different ratios of binders to fly ash were used, i.e., 10:90, 15:85, 17:83, and 20:80 with a set amount of water. Cement, metakaolin, sodium silicate, urea-formaldehyde resin, bentonite powder, and phenol-formaldehyde resin were employed as binders. A comparative study on physicochemical, mechanical, phase identification, microstructure, and optical analysis of CFA and SFA was performed. The results showed that CFA (an alkali binder) had a higher water absorption (WA) value of 9,50 % with a crushing strength (CS) value of 6,30 MPa than SFA (sodium silicate binder) with a CS value of 5,80 MPa and a WA value of 10,28 %. Experimental observations also demonstrated that the leaching ability of SFA was considerably lower than that of CFA. Most notably, SFA can be used as a substitute for construction material and structural applications along with solving FA waste disposal and related problems to a considerable extent.
Keywords
fly ash; binder; cold bonding; sintering; crushing strength; leachability; construction material
Hrčak ID:
308931
URI
Publication date:
14.10.2023.
Visits: 607 *