Skip to the main content

Short communication, Note

Significance of the Quality of Florisil® in Organochlorine Pesticide Analysis

Davorin Bažulić
Jasenka Sapunar-Postružnik
Saša Bilić


Full text: english pdf 110 Kb

page 319-325

downloads: 1.598

cite


Abstract

During the analysis of chlorinated pesticides in animal fat tissue applying the matrix solid-phase dispersion method, and notwithstanding the use of a gas chromatograph with a highly selective capillary column, two peaks occur: one with a retention time very similar to that of lindane, and the other almost identical to that of dieldrin. Repeated analyses of the same sample with a GC/MS system revealed that neither lindane nor dieldrin were present. It was proven that those peaks resulted from florisil of local origin used for analysis, but not from the original Florisil®. The removal of the first peak (»lindane«) was possible through heating of florisil of local origin at 680 °C for 4 hours, whereas some other method would be required for the removal of the other peak (»dieldrin«). The incident proved that, in such demanding analyses, it is extremely important to use original, high quality substances to avoid possible interference and misinterpretation of results.

Keywords

dieldrin; Florisil®; GC/MS identification; lindane; multiresidue extraction; organochlorine pesticides

Hrčak ID:

3176

URI

https://hrcak.srce.hr/3176

Publication date:

13.5.1999.

Article data in other languages: croatian

Visits: 2.764 *