Review article

Development of SPD continuous processes for strip and rod production

S. Dobatkin ; A. A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow, Russia
J. Zrnik ; COMTES FHT, Plzen, Czech Republic
Ilija Mamuzić ; University of Zagreb, Sisak, Croatia

Abstract

Grain refinement upon the severe plastic deformation (SPD) at low temperatures (below the recrystallization temperature) and an unusual improvement the properties of such materials are shown reliably. However, the industrial application is limited due to the absence of effective continuous SPD processes. The potential of development of continuous SPD processes based on the equal channel angular pressing (ECAP) process from one side and continuous extrusion or drawing processes from another side is considered. Existing various continuous SPD processes for strip, rod and wire production are analyzed.

Keywords

severe plastic deformation (SPD); equal – channel angular pressing (ECAP); rod production; strip; wire

Hrčak ID:

57444

URI

https://hrcak.srce.hr/57444

Publication date:

1.10.2010.

Article data in other languages: croatian

Visits: 2.250 *