Drvna industrija, Vol. 62 No. 2, 2011.
Original scientific paper
https://doi.org/10.5552/drind.2011.1027
Assessment of Wood Surface Quality Obtained During High Speed Milling by Use of Non-Contact Method
Vít Novák
; Faculty of Forestry and Wood Technology, Mendel University, Brno, Czech Republic
Miroslav Rousek
; Faculty of Forestry and Wood Technology, Mendel University, Brno, Czech Republic
Zdeněk Kopecký
; Faculty of Forestry and Wood Technology, Mendel University, Brno, Czech Republic
Abstract
This paper presents the method of surface quality evaluation at high-speed milling of wood. The effects of specific parameters of machining on the surface quality are described and results are presented of experiments carried out on selected tree species, where the effects of specific parameters on the surface quality were noted. The surface quality is evaluated by a non-contact method using a confocal sensor (CLA), which processes the results of the roughness measurement, Talysurf CLI 1000. It can be concluded that this method could actually be used for the evaluation of the surface quality.
Keywords
high-speed milling; wood surface quality; roughness; waviness; shape; filter
Hrčak ID:
69456
URI
Publication date:
20.6.2011.
Visits: 2.337 *