Original scientific paper

Distortion of ring type parts during fine-blanking

D. Česnik ; Faculty of Natural Science and Engineering, University of Ljubljana, Slovenia
V Bratuš ; Hidria Institute for Materials and Technologies, Sp. Idrija, Slovenia
B. Kosec ; Faculty of Natural Science and Engineering, University of Ljubljana, Slovenia
M. Bizjak ; Faculty of Natural Science and Engineering, University of Ljubljana, Slovenia

Abstract

Distortion control is one of the most important concerns of the metal processing industry, which also includes the fine-blanking technology. Fine-blanking of sheet metal involves metal flow and shearing, which result in complex deformation. Distortion occurs during the removal of parts from the tool due to the relaxation of internal stresses. Internal stresses that are generated during fine-blanking have an important effect on the shape and size of parts after fine-blanking. The distortion of ring type products during fine-blanking was analyzed by using dimension measurements, microscopic observation and numerical simulation.

Keywords

fine-blanking; distortion; internal stresses

Hrčak ID:

74835

URI

https://hrcak.srce.hr/74835

Publication date:

2.4.2012.

Article data in other languages: croatian

Visits: 2.107 *