Drvna industrija, Vol. 64 No. 1, 2013.
Original scientific paper
https://doi.org/10.5552/drind.2013.1206
Studies on Mechanical Properties of Composite Materials Based on Thermo Modified Timber
Evgeny Razumov
; Department of Architecture and Design of Forest Products, FSBEI HPE Kazan National Research Technological University, Kazan, Russian Federation
Ruslan Safin
; Department of Architecture and Design of Forest Products, FSBEI HPE Kazan National Research Technological University, Kazan, Russian Federation
Štefan Barcík
; Department of Wood Processing, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences in Prague, Czech Republic
Monika Kvietková
; Department of Wood Processing, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences in Prague, Czech Republic
Khasanshin Romelevich
; Department of Architecture and Design of Forest Products, FSBEI HPE Kazan National Research Technological University, Kazan, Russian Federation
Abstract
The paper presents the studies of the possibility of using thermo modified wood during the production process of composite materials. According to the studies, the infl uence of high-temperature processing of raw wood, without access of air oxygen, shows the feasibility of using this type of processing in the production of woodcement composites to improve their performance properties. It is established that high-temperature pre-treatment significantly reduces the “cement poisons”, such as water-soluble sugars in wood, reduces water absorption and swelling pressure development and, consequently, creates a composite material resistant to use under conditions of high humidity. A mathematical model was formulated that allows the determination of the ultimate strength of wood-concrete composite made from thermo modified wood particles according to the treatment temperature of the wood chips and the mixture ratio.
Keywords
thermo modification; wood-filled composite; wood-concrete
Hrčak ID:
98307
URI
Publication date:
16.3.2013.
Visits: 3.228 *