Preliminary communication

Wear and corrosion performances of new friction materials for automotive industry

R. Samur ; Department of Metallurgy, Faculty of Technical Education, Marmara University, 34722, Goztepe, Istanbul, Turkey
A. Demir ; Alemdag Cad. Turk Telekom Fabrika Yani Haldun ALAGAS Spor Kompleksi Umraniye, Istanbul, Turkey

Abstract

In this study, after a NiCr bond layer was deposited on a pearlitic, grey cast iron rotor disc of the kind used in a production passenger car (Toyota Corolla 1600 cc), Cr₃C₂-NiCr and Al₂O₃-TiO2powders were sprayed using High Velocity Oxygen Fuel(HVOF) and plasma spray processes, respectively. The discs were subjected to cosmetic corrosion test according to SAE J2334 test standard. Additionally, wear tests were carried out using a reciprocating wear tester by rubbing a 10 mm diameter Al2O3 ball on the specimens machined from rotor discs in salt solution. It was found that the Cr3C2-NiCr coating (HSCN) sprayed using HVOF method exhibited highest hardness and highest corrosion and wear resistances.

Keywords

wear; friction; corrosion; friction material; coating; automotive industry

Hrčak ID:

71183

URI

https://hrcak.srce.hr/71183

Publication date:

2.1.2012.

Article data in other languages: croatian

Visits: 2.470 *