Original scientific paper

THE DESIGN MODEL OF MICRO END-MILLS MADE BY USING THE FINITE ELEMENT METHOD

Yung-Cheng Wang ; Institute of Mechanical Engineering, National Yunlin University of Science & Technology, Yunlin, Taiwan
Chi-Hsiang Chen ; Institute of Mechanical and Electro-Mechanical Engineering, National Formosa University, Yunlin, Taiwan
Bean-Yin Lee ; Department of Mechanical and Computer-Aided Engineering, National Formosa University, Yunlin, Taiwan

Abstract

The green processing technology has been brought to the focus of attention around the world. The development and application of green cutting depend on the machine and cutting tool technology progress, in so far as the development of cutting tool technology has quite a big influence. The study was focused on the simulation analysis model for micro milling SKD61 tool steel developed by the finite element method. First, because the impact of the effective rake angle on the oblique cutting model is equivalent to that of the rake angle on the orthogonal cut model, the complex tool geometry of an end-mill will be simplified to the orthogonal cutting model. Using the Taguchi method, the FEM simulation of orthogonal cutting operation was performed under different cutting speeds, cutting depths, effective rake angles and relief angles were modified. The cutting force, tool maximum temperature, tool maximum temperature and tip distance, and the contact length of tool and chip are the major performance indexes of micro milling process. Finally, the multiple cutting performance characteristic resulting from the grey relational analysis reveals that the influencing priority ranks for micro end-mills made of SKD61 tool steel are cutting speed, effective rake angle, relief angle, and cutting depth. The FEM model is suitable for simulating the cutting performance of micro cutting process, and can also be used as a design base for micro endmills.

Keywords

micro end-mill; finite element analysis; grey relation analysis

Hrčak ID:

89199

URI

https://hrcak.srce.hr/89199

Publication date:

10.7.2012.

Visits: 1.493 *