Skip to the main content

Preliminary communication

https://doi.org/10.5552/drind.2014.1250

Changes Caused by Heat Treatment in Color and Dimensional Stability of Beech (Fagus sylvatica L.) Wood

Andromachi Mitani ; Aristotle University, Faculty of Forestry and Natural Environment, Thessaloniki, Greece
Ioannis Barboutis ; Aristotle University, Faculty of Forestry and Natural Environment, Thessaloniki, Greece


Full text: english pdf 503 Kb

page 225-232

downloads: 1.104

cite


Abstract

Thermal modifi cation of wood permanently alters several of its chemical and physical properties. Beech wood is one of the most important hardwoods in Central and Eastern Europe and is extensively used in furniture production. In this study the effects of thermal modification of beech wood (Fagus sylvatica L.) on hygroscopic properties were examined and the color changes of the treated wood were determined. Beech wood has been subjected to a heat treatment at the temperature of 180 °C for five different durations ranging from 2 to 10 h. A more intense, gradual color change of the treated samples was observed after 4-h treatment, whereas in some other cases the recorded alterations were less intense. The most pronounced color differentiations compared to untreated samples occurred in 8-h and 10-h treatments. Dimensional stability and absorption were measured after 1-h, 3-h, 6-h, 1 day and 3 days immersion in water. The 8-h treatment duration exhibits the greatest reduction of swelling and absorption percentage.

Keywords

beech wood (Fagus sylvatica L.); heat treatment; color change; hygroscopic properties

Hrčak ID:

127456

URI

https://hrcak.srce.hr/127456

Publication date:

26.9.2014.

Article data in other languages: croatian

Visits: 2.473 *