Metallurgy, Vol. 55 No. 2, 2016.
Original scientific paper
Dependence of Al bronze surfaced layers on the postweld thermomechanical treatment
V. Marušić
; Faculty of Mechanical Engineering in Slavonski Brod University of Osijek, Croatia
I. Samardžić
; Faculty of Mechanical Engineering in Slavonski Brod University of Osijek, Croatia
I. Opačak
; Faculty of Mechanical Engineering in Slavonski Brod University of Osijek, Croatia
Abstract
The research investigated properties of aluminum bronze welded to structural steel St 52-3 N. Surface material CuAl-A3 was welded in one and two layers. There were dimension, metallographic examination of structures and hardness measured before and after heat treatment and after pressurization of tested specimens. It was determined that the specimens achieved the best performance by welding two layers of surface material, by postweld heat treatment and by “hammering“.
Keywords
Al bronze; welding; thermomechanical treatment; microstructure; hardness
Hrčak ID:
146486
URI
Publication date:
1.4.2016.
Visits: 1.590 *