Metallurgy, Vol. 55 No. 3, 2016.
Original scientific paper
Experimental and numerical analysis of a knee endoprosthesis numerical model
L. Zach
; Czech Technical University in Prague, Faculty of Mechanical Engineering, Prague, Czech Republic
L. Kunčická
; VŠB-Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Ostrava-Poruba, Czech Republic
P. Růžička
; Czech Technical University in Prague, Faculty of Mechanical Engineering, Prague, Czech Republic
B. Baghirova
; VŠB-Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Ostrava-Poruba, Czech Republic
Abstract
The aim of this study is to create and verify a numerical model for a Medin Modular orthopedic knee-joint implant by investigating contact pressure, its distribution and contact surfaces. An experiment using Fuji Prescale pressure sensitive films and a finite element analysis (FEA) using Abaqus software were carried out. The experimental data were evaluated using a special designed program and were compared with the results of the analysis. The designed evaluation program had been constructed on the basis of results obtained from a supplementary calibration experiment. The applicability of the numerical model for the real endoprosthesis behavior prediction was proven on the basis of their good correlation.
Keywords
endoprosthesis; knee joint; numerical; analysis; FEM
Hrčak ID:
153617
URI
Publication date:
1.7.2016.
Visits: 1.366 *