Skip to the main content

Original scientific paper

https://doi.org/10.15255/CABEQ.2014.2049

Physicochemical Properties and Catalytic Performances of Nanostructured V2O5 over TiO2 and γ-Al2O3 for Oxidative Dehydrogenation of Propane

M. Kazemeini ; a)Department of Chemical and Petroleum Engineering, Sharif University of Technology, Azadi Avenue, P.O. Box 11365-9465, Tehran, Iran; b)Chemical and Environmental Engineering Group, College of Engineering, Ahang Blvd., Tehran, Iran
M. Nikkhah ; Department of Chemical and Petroleum Engineering, Sharif University of Technology, Azadi Avenue, P.O. Box 11365-9465, Tehran, Iran
M. Fattahi ; Department of Chemical Engineering, Abadan Faculty of Petroleum Engineering, Petroleum University of Technology, Abadan, Iran
L. Vafajoo ; Chemical and Environmental Engineering Group, College of Engineering, Ahang Blvd., Tehran, Iran


Full text: english pdf 1.169 Kb

page 9-18

downloads: 925

cite


Abstract

Samples of V2O5 catalysts supported on nanostructures of TiO2 and γ-Al2O3 were synthesized through the hydrothermal method and used for the oxidative dehydrogenation of propane (ODHP) to propylene. The TiO2 support was utilized in both commercial microstructure and synthesized nanostructure forms. Moreover, the γ-Al2O3 support was synthesized through chemical and precipitation methods. The vanadium catalyst was then deposited onto the hybrid of the TiO2 and γ-Al2O3 materials. All prepared catalysts were characterized through the BET, FESEM, FTIR, XRD and TPR techniques. Performances of the synthesized catalysts were subsequently examined in a fixed-bed reactor. The main products were propylene, ethylene and COx. The prepared catalysts over TiO2 and γ-Al2O3 were evaluated under reactor test conditions of 500 °C, feed of C3H8/air with molar ratio of 0.6, and total feed flow rate of 90 mL min–1. These resulted in optimum values of 35.53 and 23.88 % for the propylene selectivity and propane conversion, respectively 6 h after the start of the reaction. The comparison of performances made between the synthesized materials and those available in the open literature for the ODHP reaction was indeed satisfactory.

Keywords

oxidative dehydrogenation; nanostructure; V2O5; hydrothermal method; TiO2/Al2O3

Hrčak ID:

155609

URI

https://hrcak.srce.hr/155609

Publication date:

13.4.2016.

Visits: 2.048 *