Original scientific paper

https://doi.org/10.17559/TV-20190704215843

Determination of Characteristics of a Laminated Torsion Bar Spring by Using Correction Coefficients in Respect to Clamping Conditions

Vinko Močilnik ; University of Maribor, Facutly of Mechanical Engineering, Smetanova 17, 2000 Maribor, Slovenia
Jožef Predan ; University of Maribor, Facutly of Mechanical Engineering, Smetanova 17, 2000 Maribor, Slovenia
Nenad Gubeljak ; University of Maribor, Facutly of Mechanical Engineering, Smetanova 17, 2000 Maribor, Slovenia

Abstract

The laminated torsion bar is used for many mechanical purposes where a large angle with decreasing or increasing torque is necessary. The design of laminated torsion bar relates to dissipation of energy by friction between laminae, number of laminae and clamp conditions at the end of bar. The paper presents theoretical, experimental and numerical analysis of a laminated torsion bar with different numbers of laminae. Results show that in the design of a laminated torsion bar it is necessary to consider correction coefficients with respect to the geometry of laminae and the clamping conditions on both sides of the laminated torsion bar. In this paper the correction coefficients are experimentally determined. We present the procedure for determination of correction parameters for the calculation of the laminated torsion spring characteristics with a relatively large ratio of width and thickness, (h/b > 7) for low rigidity of the individual lamella.

Keywords

laminated torsion bar; rectangular section; spring characteristics; torsion; windup

Hrčak ID:

239090

URI

https://hrcak.srce.hr/239090

Publication date:

14.6.2020.

Visits: 1.927 *