Original scientific paper

https://doi.org/10.5552/drvind.2021.1913

Bending Characteristics of Laminated Wood Composites Made of Poplar Wood and GFRP

Mehmet Nuri Yildrim orcid.org/0000-0002-0180-4479 ; Karabuk University, Furniture Design and Decoration Department, Safranbolu Vocational School, Karabük, Turkey
Abdurrahman Karaman orcid.org/0000-0002-5925-7519 ; Usak University, Banaz Vocational School, Forestry Department, Usak, Turkey
Mustafa Zor ; Zonguldak Bulent Ecevit University, Caycuma Vocational School, Interior Design Programme, Zonguldak, Turkey

Abstract

In this study, 4 layers of 5 mm thick slats obtained by sawing method from poplar wood were used. Plain woven GRFP with low density and grammage of 100 g/m2 (Type 1) and plain woven GRFP with high density and grammage of 200 g/m2 (Type 2) were placed and glued between each layer. Polyvinyl acetate (PVAc-D4), Polyurethane (PU) and dual-component Epoxy (L285-resin and H285-hardener) adhesives were used for gluing the layers. Strength values (bending and modulus of elasticity) between the obtained layers were investigated. As a result of the study, it was determined that epoxy glue has higher strength than polyurethane and polyvinyl acetate glues; Type 2 plain woven fabric has higher strength than Type 1 plain woven fabric; and parallel load to the glue line results in higher performance than perpendicular load to the glue line.

Keywords

poplar; wood laminate; bending strength; modulus of elasticity

Hrčak ID:

252015

URI

https://hrcak.srce.hr/252015

Publication date:

11.2.2021.

Article data in other languages: croatian

Visits: 1.988 *