Original scientific paper

https://doi.org/10.17559/TV-20220131095258

Influence of Rotational Speed of Seed Plates on the Quality Seeding in Laboratory Operating Conditions

Anamarija Banaj orcid.org/0000-0002-5495-8260 ; Faculty of Agrobiotechnical Sciences Osijek, Vladimira Preloga 1, 31000 Osijek
Bojan Stipešević orcid.org/0000-0001-6000-3607 ; Faculty of Agrobiotechnical Sciences Osijek, Vladimira Preloga 1, 31000 Osijek
Đuro Banaj orcid.org/0000-0001-6011-9191 ; Faculty of Agrobiotechnical Sciences Osijek, Vladimira Preloga 1, 31000 Osijek
Darko Kiš orcid.org/0000-0002-9948-2040 ; Faculty of Agrobiotechnical Sciences Osijek, Vladimira Preloga 1, 31000 Osijek

Abstract

The simulation results of sunflower seeding in the laboratory with seed plates from 12 to 36 holes at working speeds from 4 to 10 km/h are presented. At a working speed of 6 km/h, the seed plate n = 12 with a rotational speed of 0.652 m/s achieved an average seeding spacing of 23.26 cm. At this rotational speed, the plate achieved a QFI of 89.15. The seed plate n = 36 with a rotational speed of 0.217 m/s achieved an average spacing of 21.76 cm with a QFI index of 98.45. At a working speed of 10 km/h, the seeding machine achieved an average spacing of 23.87 cm with a seed plate n = 12. The same seed plate achieved a rotational speed of 1.812 m/s. The seed plate n = 36 with a rotational speed of 0.602 m/s recorded an average spacing in the seeding simulation of 22.52 cm.

Keywords

intra row spacing; rotational speed; seeding; vacuum seeding machine

Hrčak ID:

288392

URI

https://hrcak.srce.hr/288392

Publication date:

15.12.2022.

Visits: 967 *