Skip to the main content

Original scientific paper

https://doi.org/10.13167/2022.25.3

Swept path analyses using unmanned aerial system (UAS)

Kornelija Bogdan ; RENCON d.o.o., Osijek, Croatia
Ivana Barišić orcid id orcid.org/0000-0002-8680-977X ; Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, Department of geotechnics, transportation engineering and geodesy, Osijek, Croatia
Vladimir Moser ; Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering and Architecture Osijek, Department of geotechnics, transportation engineering and geodesy, Osijek, Croatia
Damir Rajle ; Vocational School of Construction and Geodesy Osijek, Osijek, Croatia


Full text: english pdf 695 Kb

page 24-31

downloads: 174

cite


Abstract

The aim of this study was the verification of unmanned aerial system (UAS) application in vehicle swept path analyses by analysing the advantages and disadvantages and comparing field test results with two software solutions. In this study, swept-path analyses were performed for two vehicle types and two turning angles. UAS images were used to extract the vehicle swept path and the results were compared with two commonly used swept-path analysis software. The results indicated larger deviations between the swept paths for an angle of 125° for a light truck. For both analysed vehicles and turning angles, larger deviations were observed for the outermost point trajectory. Passenger cars occupy less space performing 125° turns than software analysis predicts, indicating that they are on the safe side when designing vehicle manipulative surfaces. For the analysed light truck, a larger turning radius was observed than the predicted for a 125° turning angle, which may be caused by the approaching and turning speeds under which the test was performed. Finally, while the UAS recording process is relatively simple and fast, data processing is demanding and time-consuming. To fulfil its full potential within swept path analyses, UAS needs to be complemented by proper data analysis software solutions for faster and more accurate swept path extraction, which would improve and rationalise the traffic area designing process.

Keywords

UAS; swept path; traffic area design; vehicle trajectories

Hrčak ID:

290300

URI

https://hrcak.srce.hr/290300

Publication date:

23.12.2022.

Visits: 514 *