Original scientific paper

Study on the strength of iron and steel smelting waste blast furnace slag

H. Z. Yang ; College of Mechanical Engineering, North China University of Science and Technology, Hebei, Tangshan, China
Z. C. Liu ; College of Mechanical Engineering, North China University of Science and Technology, Hebei, Tangshan, China

Abstract

The waste blast furnace slag generated during the steelmaking process is used as the basic material, and an appropriate amount of fly ash is added to conduct shear tests to obtain the shear mechanical indicators of the fly ash blast furnace slag mixture, thereby obtaining the strength mechanical properties of the mixture. The test results show that there are few fine particles in the mixture, which is not enough to affect its shear mechanical properties, so the water content has little effect on the shear strength of the mixture, and the mixture has good water stability; In the shear test, it can be found that the greater the normal stress, the greater the initial shear shrinkage, and the smaller the later shear expansion. After the normal stress exceeds 150 kPa, the shear expansion significantly decreases.

Keywords

blast furnace slag; shear test; shear strength; steel smelting

Hrčak ID:

307371

URI

https://hrcak.srce.hr/307371

Publication date:

1.1.2024.

Visits: 754 *