Skip to the main content

Transactions of FAMENA, Vol. 47 No. 4, 2023.

Original scientific paper

https://doi.org/10.21278/TOF.474047622

Evaluation of 3D Printing Use for Multinational Armed Forces Logistic Processes in Crisis Situations

Tomas Binar ; University of Defence, Faculty of Military Leadership, Department of Logistics, Brno, Czech Republic *
Simona Vasikova ; Faculty of Electrical Engineering and Communication, Brno University of Technology, Department of Electrical and Electronic Technology, Brno, Czech Republic
Pavel Safl ; Faculty of Electrical Engineering and Communication, Brno University of Technology, Department of Electrical and Electronic Technology, Brno, Czech Republic
Jaroslav Talar ; University of Defence, Faculty of Military Leadership, Department of Logistics, Brno, Czech Republic
Robert Kutil ; University of Defence, Faculty of Military Leadership, Department of Logistics, Brno, Czech Republic

* Corresponding author.

Full text: english pdf 2.873 Kb

page 71-86

downloads: 269

cite

Abstract

3D printing technology could be an option for the delivery of spare parts in a multinational army supply process, especially in crisis situations, when specific spare parts need to be available as soon as possible. The article deals with the selection of fused filament fabrication as an appropriate method for that purpose by comparing its advantages and disadvantages, as well as the best material (Nylon CF15 Carbon) based on important mechanical properties using the comparative and Saaty's methods. Several samples were made to be exposed to UV radiation in a climate chamber (Q-LAB Q-SUN-Xe3 equipped with a DAYLIGHT-Q filter) and tested according to the ASTM D2565 and ASTM D4459 standards. To compare the mechanical properties of the samples exposed to UV radiation with those of the unexposed ones, a tensile test was done according to the CSN EN ISO 527-2 standard. Finally, the specific spare part was designed and 3D printed, and the delivery times of the standard supply period were compared with those of the 3D printing technology.

Keywords

3D printing; Fused deposition modelling; UV radiation of plastics; climate chamber testing; Saaty's method

Hrčak ID:

309995

URI

https://hrcak.srce.hr/309995

Publication date:

28.9.2023.

Visits: 676 *