Review article
https://doi.org/10.47960/2232-9080.2023.SI.13.15
OPTIMIZATION OF MINING WORKS FOR THE PURPOSE OF OBTAINING AND INSTALLING THE DIMENSION STONE OF A UNIFORM APPEARANCE
Ivo Galić
; University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering
Ivica Pavičić
; University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering
Branimir Farkaš
; University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering
Željko Duić
; University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering
Abstract
Deposits of dimension stone (hereinafter: DS) are mostly of heterogeneous composition and non-uniform properties. For the purpose of exploring the DS deposit, it is necessary to perform certain mining work in order to collect data for the determination of: existence, position and shape of the bed, quantity and quality, and the conditions for exploitation of DS. The position and shape of the deposit have a crucial influence on DS exploitation conditions. Discontinuities of different positions, dimensions and shapes were formed as a result of dynamic and chemical processes in the rocks. The exploitation of DS from the deposit is performed by obtaining as geometrically regular and as large in size blocks as possible. The DS exploitation should be harmonized with the position and shape of the deposit as well as discontinuities for the purpose of obtaining the highest possible exploitation of stone. However, a special requirement of construction is to obtain the DS, primarily of uniform appearance and other properties. Therefore, it is necessary to optimize mining works for the purpose of obtaining and installing DS of a uniform appearance, as described and shown on several examples in this paper.
Keywords
dimension stone; discontinuities; mining works; optimization; appearance; installation
Hrčak ID:
312170
URI
Publication date:
12.12.2023.
Visits: 511 *