Original scientific paper

Study on the influence of nozzle brick structure on the tail coil of molded steel ingot

B. Zhang ; University Science and Technology Liaoning, College of applied technology, Anshan, China
Q. Liu ; University Science and Technology Liaoning, College of applied technology, Anshan, China
Z. Li ; University Science and Technology Liaoning, College of applied technology, Anshan, China
Y. H. Zhong ; University Science and Technology Liaoning, College of applied technology, Anshan, China
Y. Q. Cao ; University Science and Technology Liaoning, College of applied technology, Anshan, China
L. D. Jiang ; University Science and Technology Liaoning, College of applied technology, Anshan, China
Q. H. Xiao ; University Science and Technology Liaoning, College of applied technology, Anshan, China *

* Corresponding author.

Abstract

Mold casting has unique advantages in the production of complex shape, large single weight and small batch steel ingot. In the field of special steel, continuous casting still can not be replaced, but the quality problem of steel ingot is still the key bottleneck problem restricting the high-end of its products. At present, the industrial production often focuses on how to control the loose hole defects inside the ingot, generally ignoring the ingot surface and subcutaneous slag rolling problem. In view of this, with the study of 2,8 t octagonal ingot on the edge of arc, the influence of the nozzle brick structure in the average diameter of the nozzle is 40 mm and the cone of the nozzle is above 0,20.

Keywords

42CrMo4; molded; nozzle brick; structure

Hrčak ID:

319789

URI

https://hrcak.srce.hr/319789

Publication date:

1.1.2025.

Visits: 343 *