Preliminary communication

The influence of the base material surface preparation on the properties of thermally sprayed coatings

V. Marušić ; Faculty of Mechanical Engineering, University of Osijek, Slavonski Brod, Croatia
S. Aračić ; Faculty of Mechanical Engineering, University of Osijek, Slavonski Brod, Croatia
I. Samardžić ; Faculty of Mechanical Engineering, University of Osijek, Slavonski Brod, Croatia

Abstract

Using specimens, a research was conducted to determine the influence of the base material surface preparation for 42CrMo4 on the final coating, prior to actual thermal spraying. During thermal spraying, an Al-Ni-alloy was used as an interlayer before the actual coating with Cr-Mo-Ni. The surface hardness and the hardness distribution across the thickness of the sprayed coating were measured and the structure of respective sprayed coatings was photographed. A comparison of experimental results enabled the identification of the particular material preparation method with an optimal ratio of the satisfactory coating thickness and its hardness.

Keywords

thermal spraying; gas flame; surface preparation; hardness; steel 42CrMo4

Hrčak ID:

40252

URI

https://hrcak.srce.hr/40252

Publication date:

1.1.2010.

Article data in other languages: croatian

Visits: 1.965 *