Skip to the main content

Preliminary communication

Influence of the activating flux on weld joint properties at arc stud welding process

I. Samardžić ; Faculty of Mechanical Engineering in Slavonski Brod University of Osijek, Slavonski Brod, Croatia
D. Bajić ; Faculty of Mechanical Engineering, University of Montenegro, Podgorica, Montenegro
Š. Klarić ; Faculty of Mechanical Engineering in Slavonski Brod University of Osijek, Slavonski Brod, Croatia


Full text: english pdf 265 Kb

page 325-329

downloads: 920

cite


Abstract

In this paper, the influence of the activating flux on the weld joint properties at the drawn arc stud welding process with ceramic ferrule is analysed. In the experimental part of the paper, the arc stud welding process is applied with the application of the activating flux for ATIG process. In order to evaluate the influence of the activating flux on the welding process parameters variations, the main welding parameters were monitored by an on-line monitoring system. Besides monitoring of welding current and voltage, the influence of the activating flux on the weld joint appearance is investigated. The macrosections of the weld joints welded with the same parameters, but with and without the presence of activating flux are shown.

Keywords

arc stud welding, activating flux, on-line monitoring, macrosection analysis

Hrčak ID:

57440

URI

https://hrcak.srce.hr/57440

Article data in other languages: croatian

Visits: 1.478 *