Prethodno priopćenje

The implementation of the high technology methods of cutting on St 50 alloyed steel and the examination of the effects of cutting operation at the surface of material

L. Dahil ; Istanbul Arel University, Department of Mechanical and Metal Technologies, Turkey
I. Dahil ; Ministry of Education, Istanbul Provincial Administration of Education, Turkey
A. Karabulut ; AfyonKocatepe University, Faculty of Technology, Mechanical Engineering, Turkey

Sažetak

Since competition has risen in the manufacturing methods of present conditions, the chance of competition has lost in the situations which new or high technologies aren’t exactly known. The proper selection is important for competing in the market conditions. In this study, the aim is to present the most advantaged cutting method for obtaining quality products by using high technology for gaining a better chance of competition. In the test, St 50 alloyed steel is used as sample. This sample is cut with the methods of laser, erosion and abrasive water jet (AWJ) among the cutting operations made with the high technology. The micro structure photograph of surface of sample, which is cut, are taken and the effects of different methods of cutting on the metallurgical structure of material are compared. Also, changes are examined by performing the measurement of rigidity to the core from the edge of cutting. The most advantaged cutting method is presented by considering these examinations.

Ključne riječi

steel St50; cutting; wire; laser; water jet

Hrčak ID:

104383

URI

https://hrcak.srce.hr/104383

Datum izdavanja:

1.1.2014.

Posjeta: 1.334 *