Izvorni znanstveni članak
https://doi.org/10.5599/jese.751
Electrolytic iron production from alkaline suspensions of solid oxides: compared cases of hematite, iron ore and iron-rich Bayer process residues
Abdoulaye Maihatchi
; Reaction and Chemical Engineering Laboratory, CNRS-University of Lorraine, 1 rue Grandville, 54000 Nancy, France
Marie-Noëlle Pons
; Reaction and Chemical Engineering Laboratory, CNRS-University of Lorraine, 1 rue Grandville, 54000 Nancy, France
Quentin Ricoux
; Extracthive, Centre de Recherche CEA, Bat. 51, 30591 Marcoule, France
Frederic Goettmann
; Extracthive, Centre de Recherche CEA, Bat. 51, 30591 Marcoule, France
Francois Lapicque
; Reaction and Chemical Engineering Laboratory, CNRS-University of Lorraine, 1 rue Grandville, 54000 Nancy, France
Sažetak
Iron can be produced by the direct electrochemical reduction of hematite particles suspended in hot, concentrated NaOH solutions. Because various other iron sources can be considered, the present work was aimed at investigating the electrolytic treatment of the
“red mud” generated by the Bayer process for alumina preparation from bauxite. Such sources contain very high amounts of impurities, in particular silicon and aluminium oxidebased minerals, in addition to other mineral phases. Electrolytic reductive treatment of the industrial red mud sample was shown to be possible but with both lower current density and current efficiency than for pure hematite. After deposition tests at a fixed current density, further experiments in simulation tests have been carried out for better understanding. In particular, hematite particles were tested with and without impurities introduced in the solution. Presence of little soluble impurities at the particle surface appear to hinder the reactivity of the suspended particles at the cathode surface, whereas sidehydrogen reaction still occurs.
Ključne riječi
Iron production; electrodeposition; iron ores; red mud; surface reactivity
Hrčak ID:
235490
URI
Datum izdavanja:
10.3.2020.
Posjeta: 1.906 *