Izvorni znanstveni članak
https://doi.org/10.2478/otmcj-2020-0018
An automated nD model creation on BIM models
Miroslav Vycital
; Ceske Vysoke Uceni Technicke v Praze, Prague, Czech Republic
Cenek Jarský
; Ceske Vysoke Uceni Technicke v Praze, Prague, Czech Republic
Sažetak
The construction technology (CONTEC) method
was originally developed for automated CONTEC planning
and project management based on the data in the form of
a budget or bill of quantities. This article outlines a new
approach in an automated creation of the discrete nD building information modeling (BIM) models by using data from
the BIM model and their processing by existing CONTEC
method through the CONTEC software. This article outlines
the discrete modeling approach on BIM models as one of the
applicable approaches for nD modeling. It also defines the
methodology of interlinking BIM model data and CONTEC
software through the classification of items. The interlink
enables automation in the production of discrete nD BIM
model data, such as schedule (4D) including work distribution end resource planning, budget (5D)—based on integrated pricing system, but also nD data such as health and
safety risks (6D) plans (H&S Risk register), quality plans,
and quality assurance checklists (7D) including their monitoring and environmental plans (8D). The methodology of
the direct application of the selected classification system,
as well as means of data transfer and conditions of data
transferability, is described. The method was tested on the
case study of an office building project, and acquired data
were compared to actual construction time and costs. The
case study proves the application of the CONTEC method
as a usable method in the BIM model environment, enabling the creation of not only 4D, 5D models but also nD
discrete models up to 8D models in the perception of the
construction management process. In comparison with
the existing BIM classification systems, further development of the method will enable full automated discrete nD
model creation in the BIM model environment.
Ključne riječi
automated nD model creation; BIM; nD; xD; 4D; 5D; CONTEC
Hrčak ID:
243175
URI
Datum izdavanja:
1.2.2020.
Posjeta: 1.093 *