Skoči na glavni sadržaj

Prethodno priopćenje

The main reasons for increased copper losses with slags from vanyukov furnace

M. A. Dyussebekova orcid id orcid.org/0000-0002-4359-9784 ; Satbayev University, Institute of Metallurgy and Ore Beneficiation, Almaty, Kazakhstan
B. K. Kenzhaliyev ; Institute of Metallurgy and Ore Beneficiation, Almaty, Kazakhstan
S. A. Kvyatkovskiy ; Institute of Metallurgy and Ore Beneficiation, Almaty, Kazakhstan
E. A. Sit’ko ; Institute of Metallurgy and Ore Beneficiation, Almaty, Kazakhstan
D. Nurkhadianto ; Faculty of Engineering, Universitas Negeri Yogyakarta, Indonesia


Puni tekst: engleski pdf 290 Kb

str. 309-312

preuzimanja: 450

citiraj


Sažetak

The article examines the factors affecting to the loss of copper with slags during autogenous smelting of copper concentrates at the Balkhash copper smelting plant (BCP). The composition of concentrates processed in the Vanyukov furnace was analyzed. Slag formation during alloying FeO with ores containing approximately the same amount of SiO2 was studied. The fluxing ability of silicate ore used in charge smelting at BCP has been determined. A scanning electron microscope (SEM) was used to study the distribution of elements in the slag and the main reason for the low fluxing ability of the ores used at BCP was revealed.

Ključne riječi

Vanyukov furnace; chemical composition; autogenous smelting; copper loss; X-ray investigation

Hrčak ID:

256045

URI

https://hrcak.srce.hr/256045

Datum izdavanja:

1.7.2021.

Posjeta: 833 *