Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.15644/asc57/3/3

Short-Term Fluoride Release from Ion-Releasing Dental Materials

Llubitza Slaviza Banic Vidal orcid id orcid.org/0009-0009-0696-2765 ; Studentica doktorskog studija Stomatološkog fakulteta Sveučilišta u Zagrebu
Nikolina Nika Veček orcid id orcid.org/0000-0003-1551-8649 ; Studentica doktorskog studija Medicinskog fakulteta Sveučilišta u Splitu
Ivan Šalinović orcid id orcid.org/0000-0002-5904-1427 ; Zavod za endodonciju i restaurativnu stomatologiju Stomatološkog fakulteta Sveučilišta u Zagrebu
Ivana Miletić ; Zavod za endodonciju i restaurativnu stomatologiju Stomatološkog fakulteta Sveučilišta u Zagrebu
Eva Klarić ; Zavod za endodonciju i restaurativnu stomatologiju Stomatološkog fakulteta Sveučilišta u Zagrebu
Silvana Jukić Krmek ; Zavod za endodonciju i restaurativnu stomatologiju Stomatološkog fakulteta Sveučilišta u Zagrebu


Puni tekst: engleski pdf 301 Kb

str. 229-237

preuzimanja: 614

citiraj

Puni tekst: hrvatski pdf 301 Kb

str. 229-237

preuzimanja: 123

citiraj


Sažetak

Objective: To compare short-term release of fluoride ions from ion-releasing dental restorative materials. Material and methods: Seven experimental groups were prepared using the following six different materials: alkasite (Cention Forte), resin-modified glass ionomer cement (Fuji II LC), bioactive composite (ACTIVA BioACTIVE-RESTORATIVE), fluoride-containing nano-hybrid composite (Luminos UN), coat-free glass hybrid (EQUIA Forte HT), coat-applied glass hybrid (EQUIA Forte HT), and glass ionomer cement (Fuji IX). A total of 40 samples for each group (n=40) were prepared in Teflon molds (8 mm x 2 mm) and placed in polyethylene vials with 5 ml of deionized water. Fluoride release was measured after 6, 24, 48 hours, and after 5 weeks using an ion-selective electrode. The results were expressed in mg/l and the data were statistically analyzed using ANOVA. Results: Significant differences in fluoride release were observed within the first 6 hours (ANOVA p<0.001). EQUIA
Forte HT had the highest release, while the other materials showed no significant differences. After 24 hours, EQUIA Forte HT (p<0.001) and Luminos UN (p<0.05) exhibited significantly higher releases, compared to other tested materials. EQUIA Forte HT maintained the highest release at 48 hours
(p<0.001), followed by Cention Forte (p<0.05) and Luminos UN (p<0.05). All material pairs showed significant differences in fluoride release at 5 weeks (p<0.001). Conclusion: Coat-free EQUIA Forte HT had the overall highest fluoride release, while Cention Forte demonstrated the greatest increase over time. ACTIVA BioACTIVE-RESTORATIVE exhibited the lowest fluoride release in this study.

Ključne riječi

Fluorides; Dental Materials; Composite Resins; Glass Ionomer Cements; Ion Release; Glass Hybrids; Composites

Hrčak ID:

308189

URI

https://hrcak.srce.hr/308189

Datum izdavanja:

27.9.2023.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.253 *